• As a glue compatible with both heat and UV curing, it has low air release, low shrinkage, and low CTE;
• Ingredients: modified epoxy resin, 1-component glue, solvent-free;
• High viscosity, catalytic properties (Thixotropy);
• Used for bonding between materials such as metal, glass, plastic as well as casting, fixing, or mounting around electronic components;
• Operating temperature: -40 ⁰ C ~ 150 ⁰ C, depending on the application;
• RoHS compliant 2015/863/EU, Halogen-free according to IEC 61249-2-21;
• Meets the VOC limit for adhesives according to the GB33372-2020 regulation.

• It is an epoxy glue that cures at low temperatures, used for bonding temperature-sensitive sensors, camera modules, etc.
• Adhesive meets halogen-free standards according to IEC 61248-2-21 regulations;
• Meets RoHS 2015/863/EU standards;
• Glue can be dispersed using robot systems with needle tips.
• Operating temperature: -40 0C ~ 150 0C, depending on application;
• Meets volatile organic matter (VOC) content limit standards according to GB33372-2020;
• Meets DIN EN ISO 10993-5: cytotoxicity test.

DELO-DUOPOX SJ8665 is a 2-component adhesive, derived from modified epoxy resin, cured at room temperature (accelerated when heated to +80^oC), temperature resistant up to +180^oC, and under packaging dual-bottles that compatible with Automix dispenser.

• An adhesive that is compatible with both thermal and UV curing methods;
• One component adhesive is derived from modified epoxy resin, free-bisphenol A, nonylphenols, CFC / HFC, and solvent-free.
• Range of use temperature: -40 ⁰C ~ 180 ⁰C, depending on the certain application;
• Especially for components of the camera module;
• Combined bonding between PC, PPS, FR4 resins, metal with plastic, metal with metal such as Al / Al, steel/steel,… as well as temperature-sensitive components;
• Fast fixation of components and details.

• DELO-PUR9694 is multi-purpose, bonding glass/metal, PBT, PET, and many other materials.
• Fix components with passivation surfaces (Ferrite, PBT, Al, PET foil), such as coils, capacitors, and plugs, etc. on the FR4 printed circuit board to prevent vibration;
• The glue has a good resilience to the touch, high strength for both static and dynamic loads, good response to large gaps due to its ability to resist vibration during operation.

• DELO-DUOPOX TC8686 (TC=Thermal Conductive) is a 2-component adhesive, base on modified epoxy resin, that cures at room temperature for 168h but will accelerate to cure within 1h when heated to +80 ^oC. It is developed for the application of Lithium battery pack bonding application to heat sinks for batteries in electric vehicles.
• - Compliant RoHS certified according to directive 2015/863/EU;
• - Passed ANSI/UL 94 V-0 Flammability Test

The DELO-XPRESS 903 dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 50 ml side-by-side glue cartridges and a 1:1 mixing ratio.

The gun uses compressed air to help apply the glue accurately, without the overflow glue falling due to residual stress like other manual guns. Thanks to using compressed air, and lightweight guns, you can easy to dispense glue with no hand fatigue while applying the glue.

DELO-XPRESS 907 dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 50 ml side-by-side glue bottles and 1:1 and mixing ratio 1:2.

This is an extended version of DELO-XPRESS 903, for both 1:1 and 1:2 mixing types of glue.

The gun uses compressed air to help apply the glue accurately, without the overflow glue falling due to residual stress like manual squeeze guns. The force acting on the trigger is very small, and the weight of the gun is quite light, the gravity-balanced design should not cause hand fatigue when applying glue.

The DELO-XPRESS 902 mini dispensing gun is used for mixing and applying glue for 2-component adhesives, suitable for 50 ml side-by-side glue bottles and 1:1 mixing ratio and 1:2.

The gun uses a manual glue release mechanism, which is very light, compact, easy to use in Labs, R&D rooms, does not require high accuracy.

The gun does not use compressed air, so it moves very flexibly and safely for the user.

• Suitable for removing epoxy, acrylate adhesives when they have not been fully cured. Especially specialized for PHOTOBOND glue line, DUALBOND acrylate.
• The composition does not contain volatile substances harmful to the environment CFC/FC, safe for users.
• Bottled in 1000ml cans or 500ml aerogel spray bottles for convenient use.

• It is a transparent, solvent-free, low-viscosity, flowable, modified epoxy adhesive with fully curing by light.
• Halogen-free according to IEC 61249-2-21;
• Compliant RoHS 2015/863/EU standard.
• Specialized in bonding optical materials, imprint materials.

DELO MONOPOX HT2860 is a 1-component adhesive, derived from modified epoxy resin, curing at high temperature (+130 ^o C), for applications requiring high-temperature resistance, and fast heat conductivity.

Use temperature range: from -55 ~ 220 ^o C